PJP Tutorial – Step 4

Enter process specifications:

Phantom Console - Process Detail Screen 05/20/07 13:27:02

YourLogon - TUTORIAL

Run Instruction: PHANTOM.TEST

Cycle: C

Time: 00:05

Max Run Time: 00:01

Override Next Launch:

Email on Completion: Phantom_Admin@YourURL.com

Comment:

Stacked Inputs: 01. TEXT VALUE FOR PHANTOM.TEST

(/)change, (F)ile, e(X)it: F

You are now looking at the “Process Detail Screen”. Please answer the prompts as follows:

Run Instruction:

Enter any command which will work if entered at TCL. In this case, enter the name of our demo program PHANTOM.TEST.

Cycle:

Please take the time to read the explanation of the scheduling options offered by PJP.

For the purposes of this tutorial, enter C for continuous runs.

Time:

Enter 00:05 to schedule 5 minutes between runs.

Max Run Time:

The PHANTOM.TEST program doesn’t take very long to execute. Enter 00:01 for a maximum run time of 1 minute.

Override Next Launch:

Bypass this prompt by keying [Enter].

Email on Completion:

Enter your own email address to be notified each time the program completes.

Comment:

Bypass this prompt by keying [Enter].

Stacked Inputs:

This is not a normal prompt, but logically more like a screen within a screen. There are multiple options, starting with the bottom prompt:

Stacked Input command: (A)dd, e(X)it:

If you are running a program which requires user inputs, you can pre-input the required values here. Our demo program requires user input, so a value must be entered here.

Enter A at the bottom prompt to add a stacked input.

Enter TEXT VALUE FOR PHANTOM.TEST on the first line

Key [Enter] at the second line, bringing you back to the bottom prompt

Enter X to exit the Stacked Input prompting.

Important Note: Stacked inputs can be troublesome. Click here for details.

Returning to the main bottom prompt, you have now defined the parameters for a process to run within your phantom.

Enter F to save your specifications for this process and to return to the Phantom Detail Screen.

Home Back Next